Err

Help & Advice | 01424 777 873
Your cart 0 £ 0.00
Quality fittings for buildings of distinction
Shop Departments
Search Your Cart   Continue Shopping

#08 - 32mm/32mm Euro Profile Key & Thumbturn Cylinder UMK

(Code: 2752-111-131MK)
Finish :
ADDITIONAL KEYS :
£ 31.68
(-10.04%) £ 28.50
Available at Supplier
Available in 7 days
Add to cart
#08 - 32mm/32mm Euro Profile Key & Thumbturn Cylinder UMK
  • #08 - 32mm/32mm Euro Profile Key & Thumbturn Cylinder UMK
  • #08 - 32mm/32mm Euro Profile Key & Thumbturn Cylinder UMK

64mm (32mm/32mm) Euro Profile Key & Thumbturn Cylinder Lock Barrel Under Master Key


- Priced per Single complete with 3 keys - additional keys available
- Key operation externally, thumbturn operation internally
- High security 10 pin mechanism
- Restricted key profile
- Suited Under Master Key
- Anti-drill, anti-pick, anti-bump & anti-plug pull
- Special Order Item

Polished Brass Satin Chrome Polished Chrome
Black

High Security BS EN 1303 Suitable for Fire Doors 10 Year Guarantee Residential Use Commercial Use Industrial Use
Anti-Drill Anti-Pick Anti-Bump Anti-Plug Pull

A 64mm (32mm/32mm) Euro Profile Key and Thumbturn Cylinder Lock Barrel suitable for applications where key locking/unlocking is required externally with thumbturn operation internally. The cylinder features a High Security pin tumbler mechanism with 6 main top pins, 4 special side pins and hardened steel inserts providing anti-drill, anti-pick and anti-bump characteristics. The Restricted key profile offers higher security against unauthorised key duplication - cut keys and key blanks are only available through authorised stockists. This cylinder lock barrel is certified to the highest grades of BS EN1303 for durability and key security as standard. This version is supplied "Master Keyed" - please refer to the information under the "Keying" tab above.

Use only with lock cases and multipoint locks described as "euro profile", "DIN euro" or "dual profile".

For locks fitted centrally, the minimum cylinder length required is calculated by adding the door thickness to the thickness of escutcheons or handle backplates. Cylinders should ideally be flush with, or protrude no more than 3mm/5mm from, the face of escutcheons or furniture backplates. Where locks are fitted off centre the minimum cylinder length should be calculated for each side individually by measuring from out from the lock centre line. Again, don't forget to add the thickness of escutcheons or backplates.

Detailed advice on the selection of euro profile cylinder lock barrels can be found in our [Euro Profile Lock Cylinders Specification Guide]

For best results and long life, this cylinder lock barrel should be lubricated with a specialist lock spray or good quality graphite powder. Do NOT use oils or WD40.

These cylinder lock barrels are supplied suited "Under Master Key" whereby groups of cylinders are operable by their individual keys AND by a master key that operates all of the cylinders within the group. This option is often specified for commercial projects as it allows keys to be issued on a hierarchical basis. This feature is available for all of our MP10 cylinders so your group can contain any combination of the cylinder types, sizes and finishes within the range.

Cylinder lock barrels ordered master keyed will be supplied in one straight suited group. For systems requiring grand master and sub-master groupings, or for more complicated key control systems please contact us prior placing your order.

Master keys can be ordered [here]

Successfully type tested for conformity to all of the requirements of BS EN 1303:2005 including the additional requirements for fire/smoke door use - certificates are available on request

Fire rating is only applicable to this product when fitted to timber based door assemblies of proven fire resistance as defined in BS EN1634-1 or BS476 Part 22:1987 and when used with suitably rated locks.

One euro profile cylinder lock barrel as described complete with 3 keys, cylinder ring, mounting plate and 2 retaining screw.

This euro profile cylinder lock barrel is manufactured in master keyed format to special order only. You should therefore allow 5 - 7 working days for delivery.

Special Order items are non returnable.