A classic, "Penny End" tee hinge design suitable for medium weight doors up to 36" (926mm) wide or heavier doors up to 32" (826mm) such as double boarded doors and framed doors. Forming part of our "Stonebridge Forge" range this hinge is expertly hand crafted and finished in hard wearing Natural Forged Steel for a traditional look with a contemporary twist.
Tee hinges are designed to be fitted to the opening face of doors with both the horizontal strap and vertical frame plate being visible when the door is in the closed position. As a rule of thumb, light to medium weight doors (soft wood, pine) will require hinges approx one third to half the door width. For heavier doors (eg solid oak) select a hinge one half to two thirds the door width. For doors over 84" (2100mm) high we recommend a third hinge fitted centrally.
Natural Forged Steel is a hard wearing, durable finish suitable for both internal and external applications in normal conditions. However, we DO NOT recommend this product for coastal areas or other harsh environments.
Lubricate immediately after fitting and periodically thereafter - at least twice yearly. Clean with an oil impregnated cloth to remove harmful deposits, especially when fitted externally.
One hinge as described complete with traditional slotted roundhead woodscrews in matching finish.
These hinges are a non stock item and normally need to ordered in from the manufacturer. You should therefore allow approximately 7 to 10 days for despatch.