Help & Advice | 01424 777 873
Your cart 0 £ 0.00
Quality Ironmongery Fittings for Buildings of Distinction
Shop Departments
Search Your Cart   Continue Shopping

#09 35mm/35mm Euro Profile Key & Thumbturn Cylinder

(Code: 2752-122-137)
Finish :
£ 20.84
(-9.98%) £ 18.76
(6 Item(s) In Stock)
Add to cart
#09 35mm/35mm Euro Profile Key & Thumbturn Cylinder
  • #09 35mm/35mm Euro Profile Key & Thumbturn Cylinder
  • #09 35mm/35mm Euro Profile Key & Thumbturn Cylinder

70mm (35mm/35mm) Euro Profile Key & Thumbturn Cylinder Lock Barrel Keyed to Differ

- Priced per Single complete with 3 keys - additional keys available*
- Key operation externally, thumbturn operation internally
- High security 10 pin mechanism
- Restricted key profile
- Keyed to differ with individual keys
- Anti-drill, anti-pick, anti-bump & anti-plug pull
- Core Stock Product

Polished Brass Satin Chrome Polished Chrome

High Security BS EN 1303 Suitable for Fire Doors 10 Year Guarantee Residential Use Commercial Use Industrial Use
Anti-Drill Anti-Pick Anti-Bump Anti-Plug Pull

A 70mm (35mm/35mm) Euro Profile Key and Thumbturn Cylinder Lock Barrel suitable for applications where key locking/unlocking is required externally with thumbturn operation internally. The cylinder features a High Security pin tumbler mechanism with 6 main top pins, 4 special side pins and hardened steel inserts providing anti-drill, anti-pick and anti-bump characteristics. The Restricted key profile offers higher security against unauthorised key duplication - cut keys and key blanks are only available through authorised stockists. This cylinder lock barrel is certified to the highest grades of BS EN1303 for durability and key security as standard, and has been included as part of a complete door set succesfully tested to PAS 24. This version is supplied "Keyed to Differ" - please refer to the information under the "Keying" tab.

Use only with lock cases and multipoint locks described as "euro profile", "DIN euro" or "dual profile".

For locks fitted centrally, the minimum cylinder length required is calculated by adding the door thickness to the thickness of escutcheons or handle backplates. Cylinders should ideally be flush with, or protrude no more than 3mm/5mm from, the face of escutcheons or furniture backplates. Where locks are fitted off centre the minimum cylinder length should be calculated for each side individually by measuring from out from the lock centre line. Again, don't forget to add the thickness of escutcheons or backplates.

Detailed advice on the selection of euro profile cylinder lock barrels can be found in our [Euro Profile Lock Cylinders Specification Guide]

For best results and long life, this cylinder lock barrel should be lubricated with a specialist lock spray or good quality graphite powder. Do NOT use oils or WD40.

This cylinder lock barrel is supplied "Keyed to Differ" whereby each cylinder is operated by it's own individual keys (3 supplied).

"Keyed Alike" and "Master Keyed" format is available to special order - please contact us for details & pricing

Successfully type tested for conformity to all of the requirements of BS EN 1303:2005 including the additional requirements for fire/smoke door use - certificates are available on request

Fire rating is only applicable to this product when fitted to timber based door assemblies of proven fire resistance as defined in BS EN1634-1 or BS476 Part 22:1987 and when used with suitably rated locks.

One euro profile cylinder lock barrel as described complete with 3 keys and retaining screw.

This euro profile cylinder lock barrel is normally available from stock for immediate despatch. Orders for cylinders with additional keys take a little longer so you should allow an extra few days.