Err

Help & Advice | 01424 777 873
Your cart 0 £ 0.00
Quality Ironmongery Fittings for Buildings of Distinction
Shop Departments
Search Your Cart   Continue Shopping

#06 - 35mm/35mm Euro Profile Double Cylinder UMK

(Code: 2744-122-139MK)
Finish :
ADDITIONAL KEYS :
£ 26.90
Available at Supplier
Available in 10 days
Add to cart
#06 - 35mm/35mm Euro Profile Double Cylinder UMK
  • #06 - 35mm/35mm Euro Profile Double Cylinder UMK
  • #06 - 35mm/35mm Euro Profile Double Cylinder UMK

70mm (35mm/35mm) Euro Profile Double Cylinder Lock Barrel Under Master Key


- Priced per Single complete with 3 keys - additional keys available*
- Key operation internally & externally
- Medium security 5 pin mechanism
- Suited Under Master Key
- Special Order Item

Satin Brass Unlacquered Polished Brass Unlacquered Antique Brass Unlacquered
Imperial Dark Bronze Satin Nickel Polished Chrome

Medium Security BS EN 1303 Suitable for Fire Doors 10 Year Guarantee
Residential Use Commercial Use

A 70mm (35mm/35mm) Euro Profile Double Cylinder Lock Barrel suitable for internal and external applications where locking or unlocking by key is required to both sides of the door. Part of our Adapta J79 5 pin open profile cylinder range and ideal for medium security applications in residential and commercial settings where higher security cylinders are not required. This version is supplied "Master Keyed" - please refer to the information under the "Keying" tab above.

Use only with lock cases and multipoint locks described as "euro profile", "DIN euro" or "dual profile".

For locks fitted centrally, the minimum cylinder length required is calculated by adding the door thickness to the thickness of escutcheons or handle backplates. Cylinders should ideally be flush with, or protrude no more than 3mm/5mm from, the face of escutcheons or furniture backplates. Where locks are fitted off centre the minimum cylinder length should be calculated for each side individually by measuring from out from the lock centre line. Again, don't forget to add the thickness of escutcheons or backplates.

Detailed advice on the selection of euro profile cylinder lock barrels can be found in our [Euro Profile Lock Cylinders Specification Guide]

For best results and long life, this cylinder lock barrel should be lubricated with a specialist lock spray or good quality graphite powder. Do NOT use oils or WD40.

These cylinder lock barrels are supplied suited "Under Master Key" whereby groups of cylinders are operable by their individual keys AND by a master key that operates all of the cylinders within the group. This option is often specified for commercial projects as it allows keys to be issued on a hierarchical basis. This feature is available for all of our Adapta J79 cylinders so your group can contain any combination of the cylinder types, sizes and finishes within the range.

Cylinder lock barrels ordered master keyed will be supplied in one straight suited group. For systems requiring grand master and sub-master groupings, or for more complicated key control systems please contact us prior placing your order.

Master keys can be ordered [here]

Successfully type tested for conformity to all of the requirements of BS EN 1303:2005 including the additional requirements for fire/smoke door use - certificates are available on request

Fire rating is only applicable to this product when fitted to timber based door assemblies of proven fire resistance as defined in BS EN1634-1 or BS476 Part 22:1987 and when used with suitably rated locks.

One euro profile cylinder lock barrel as described complete with 3 keys, cylinder ring, mounting plate and 2 retaining screw.

This euro profile cylinder lock barrel is manufactured in master keyed format to special order only. You should therefore allow 7 - 10 working days for delivery.

Special Order items are non returnable.