Err

Help & Advice | 01424 777 873
Your cart 0 £ 0.00
Quality fittings for buildings of distinction
Shop Departments
Search Your Cart   Continue Shopping

#04 - 3" Euro Profile Cylinder Sashlock

(Code: 2532-602-150)
Finish :
£ 16.80
(-10.00%) £ 15.12
(1 Item(s) In Stock)
Add to cart
#04 - 3" Euro Profile Cylinder Sashlock
  • #04 - 3" Euro Profile Cylinder Sashlock
  • #04 - 3" Euro Profile Cylinder Sashlock

Medium Security Euro Profile Cylinder Mortice Sashlock Case for Self-Sprung Lever Door Handles


- Priced per Single complete frame keep & fixings
- Latch bolt withdrawn from either side by lever handle
- Deadbolt operated by euro profile cylinder lock barrel
- 76mm case depth, 57mm backset, 47.5mm centres
- Optional [Rebate Conversion Set] for double doors
- Core Stock Product

Brass PVD Satin Stainless Steel

10 Year Guarantee CE Marked BS EN 12209: 2003 Fire Rated FD30/FD60
Residential Use Commercial Use

This quality Mortice Sashlock case is an ideal choice for both residential properties and medium use commercial applications and can be used with any of our Euro Profile Cylinder Lock Barrels to provide a range of locking functions. Suitable for self-sprung lever handle furniture and pierced to accept horizontally opposed bolt-through fixings. Fully reversible to suit left or right hand hung doors and approved for use on fire rated timber door sets in accordance with current regulations.

This lock has a medium sprung latch follower and should only be used with lever handle furniture with integral springing in the rose or backplate. To avoid fixing screws fouling the latch body use handles with horizontally opposed bolt through fixings or with backplates where fixing positions are adequately spaced. NOT recommended for use with door knobs.

Can be fitted to double doors with rebated meeting stiles when used with the rebate conversion set in the Related Items section below.

Detailed advice on the selection of mortice locks and latches can be found in our [Mortice Locks & Latches Specification Guide].

For best results and long life, this latch should be lubricated with a light machine oil at least once a year.

This product has been successfully type tested for conformity to all of the requirements of BS EN 12209 : 2003 including the additional requirements for fire/smoke door use - certificates are available on request.

Fire rating is only applicable to this product when fitted to timber based door assemblies of proven fire resistance as defined in BS EN1634-1 or BS476 Part 22:1987 and when fitted with appropriate intumescent material.

One sashlock case complete with faceplate, frame keeper plate and all fixing screws.

Euro profile lock cylinders should be ordered separately.

This lock is normally available from stock. If we are temporarily out of stock you should allow 3 - 5 working days for despatch.