A classic Penny End Tee Hinge design suitable for light to medium weight doors up to 28" (726mm) wide and an ideal choice for narrow ledged and braced larder or pantry doors etc. Forming part of our "New Industrial" range this hinge is manufactured by Stonebridge Forge using a combination of traditional and state of the art techniques to produce a hinge that is both highly functional and aesthetically pleasing. A popular choice for high quality joinery in both traditional and contemporary settings.
The hinge is finished in ARMOR-COAT® Flat Black which is an exceptionally hard wearing finish with a 30% sheen suitable for internal and external applications even in coastal areas.
Tee hinges are designed to be fitted to the opening face of doors with both the horizontal strap and vertical frame plate being visible when the door is in the closed position. As a rule of thumb, light to medium weight doors (soft wood, pine) will require hinges approx one third to half the door width. For heavier doors (eg solid oak) select a hinge one half to two thirds the door width. For doors over 84" (2100mm) high we recommend a third hinge fitted centrally.
Lubricate immediately after fitting and periodically thereafter - at least twice yearly. Clean with an oil impregnated cloth to remove harmful deposits, especially when fitted externally.
One hinge as described complete with traditional slotted roundhead woodscrews in matching finish.
These hinges are a non stock product and will normally need to ordered in from the manufacturer. You should therefore allow approximately 3 - 5 days for despatch.