Err

Help & Advice | 01424 777 873
Your cart 0 £ 0.00
Quality fittings for buildings of distinction
Shop Departments
Search Your Cart   Continue Shopping

#04 - 18" Penny End T (Tee) Strap Hinge

(Code: 1006.118.408)
£ 38.40
(-10.00%) £ 34.56
Available at Supplier
Available in 5 days
Add to cart
#04 - 18" Penny End T (Tee) Strap Hinge
  • #04 - 18" Penny End T (Tee) Strap Hinge
  • #04 - 18" Penny End T (Tee) Strap Hinge

Forged Steel T Pattern (Tee) Strap Hinge for Doors up to 36" (926mm) Wide


- Priced per Single hinge complete with fixing screws
- Suitable for doors up to 926mm wide
- Hard wearing UV protected finish
- Maximum corrosion resistance
- Back Order Item

Stonebridge Forge Product Ref: FB134

Flat Black

Made in Britain 5 Year Guarantee Residential Use

A classic Penny End Tee Hinge design suitable for light to medium weight doors up to 36" (926mm) wide and an ideal choice for wider room doors and passage doors etc. Forming part of our "New Industrial" range this hinge is manufactured by Stonebridge Forge using a combination of traditional and state of the art techniques to produce a hinge that is both highly functional and aesthetically pleasing. A popular choice for high quality joinery in both traditional and contemporary settings.

The hinge is finished in ARMOR-COAT® Flat Black which is an exceptionally hard wearing finish with a 30% sheen suitable for internal and external applications even in coastal areas.

Tee hinges are designed to be fitted to the opening face of doors with both the horizontal strap and vertical frame plate being visible when the door is in the closed position. As a rule of thumb, light to medium weight doors (soft wood, pine) will require hinges approx one third to half the door width. For heavier doors (eg solid oak) select a hinge one half to two thirds the door width. For doors over 84" (2100mm) high we recommend a third hinge fitted centrally.

Lubricate immediately after fitting and periodically thereafter - at least twice yearly. Clean with an oil impregnated cloth to remove harmful deposits, especially when fitted externally.

One hinge as described complete with traditional slotted roundhead woodscrews in matching finish.

These hinges are a non stock product and will normally need to ordered in from the manufacturer. You should therefore allow approximately 3 - 5 days for despatch.