Help & Advice | 01424 777 873
Your cart 0 £ 0.00
Quality fittings for buildings of distinction
Shop Departments
Search Your Cart   Continue Shopping

#07 - 12" Penny End T (Tee) Strap Hinge Black

(Code: 1016.112NBK)
£ 22.50
Available at Supplier
Available in 10 days
Add to cart
#07 - 12" Penny End T (Tee) Strap Hinge Black
  • #07 - 12" Penny End T (Tee) Strap Hinge Black
  • #07 - 12" Penny End T (Tee) Strap Hinge Black

Stonebridge Hand Forged Steel Penny End T (Tee) Strap Hinge for Doors up to 28" (726mm) Wide

- Priced per Single hinge complete with fixing screws
- Heavy gauge material
- Suitable for doors up to 726mm wide
- Back Order Item

Stonebridge Forge Product Ref: SB-H-PE-132

Natural Black

15 Year Guarantee Residential Use

A classic, "Penny End" tee hinge design suitable for light weight doors up to 28" (726mm) wide and an excellent choice for narrower room doors etc. Forming part of our "Stonebridge Forge" range this hinge is expertly hand crafted in forged steel and finished in Natural Black for a traditional look with a contemporary twist.

Tee hinges are designed to be fitted to the opening face of doors with both the horizontal strap and vertical frame plate being visible when the door is in the closed position. As a rule of thumb, light to medium weight doors (soft wood, pine) will require hinges approx one third to half the door width. For heavier doors (eg solid oak) select a hinge one half to two thirds the door width. For doors over 84" (2100mm) high we recommend a third hinge fitted centrally.

Natural Black is a traditional deep black oxide finish protected by a layer of pure beeswax. This is a "living" finish that will age naturally over time and is recommended for internal use only.

Lubricate immediately after fitting and periodically thereafter - at least twice yearly. Clean with an application of maintenance wax buffed over with a soft shoe brush.

One hinge as described complete with traditional slotted roundhead woodscrews in matching finish.

These hinges are a non stock item and normally need to ordered in from the manufacturer. You should therefore allow approximately 7 to 10 days for despatch.