Help & Advice | 01424 777 873
Your cart 0 £ 0.00
Quality Ironmongery Fittings for Buildings of Distinction
Shop Departments
Search Your Cart   Continue Shopping

#04 Intumescent Liner Pack for Mortice Deadlocks

(Code: 2499-294-000)
£ 11.34
Available at Supplier
Available in 5 days
Add to cart
#04 Intumescent Liner Pack for Mortice Deadlocks
Suitable for FD30/FD60 Timber Fire Doors

FD30/FD60 Intumescent Liner Pack for UK Sized Small Case Mortice Deadocks

For our 2.5" (66mm) & 3" (78mm) 'UK Base' Small Case Mortice Deadlocks

Priced per Single
Core Stock Product
Intumescent Liner Packs should be used when fitting locks and latches to fire rated timber doors. In the event of fire, the intumescent material expands to seal the door and frame around faceplates, strikeplates and handle spindles to prevent the ingress/egress of hot gases. This pre-cut intumescent liner pack is suitable for use with our 'UK Base' range of small case Mortice Deadlocks.

Important: ALL locks and latches certified as being suitable for use on fire doors will normally have been tested with the inclusion of intumescent material positioned behind the faceplate and strikeplate and on the lock/latch body (this will be stated on product test certificates). Where this is the case intumescent material of the correct type MUST be fitted to ensure full compliance with the relevant standard.

This intumescent liner pack is intended for use only with appropriate locks/latches that have been successfully type tested for conformity to all of the requirements of BS EN 1935 : 2002 including the additional requirements for fire/smoke door use.

Detailed advice on the selection of mortice locks & latches can be found [HERE]