This best selling hinge is designed for use on heavier doors up to 120kg and is suitable for commercial and industrial environments where doors will be subject to a high degree of through traffic. Incorporating heavy duty ball race bearings for increased performance and resistance to wear this hinge is a good choice for doors fitted with overhead door closers and is certified for use on FD30/FD60 fire rated door sets. A very popular hinge and used by many of our joinery trades customers as their first choice for heavy, glazed external French doors.
This hinge has a load capacity of 120kg based on fitting THREE hinges. Detailed advice on the selection of hinges for full height doors can be found in our [Hinge Specification Guide] Note that fire doors MUST be fitted with three or more hinges.
Important - Fire rating is only applicable to this hinge when fitted to timber based door assemblies of proven fire resistance to BS EN1634-1 and when used in conjunction with appropriate [Intumescent Hinge Liners]
Manufactured from grade 201 stainless steel and suitable for most internal applications and external use under normal conditions. NOT recommended for coastal areas or other harsh environments.
These hinges are supplied dry and require lubrication immediately after fitting and periodically thereafter. If specified correctly and properly maintained they will provide many years of consistent, trouble free service.
This product has been successfully type tested for conformity to all of the requirements of BS EN1935 : 2002 including the additional requirements for fire/smoke door use - certificates are available on request.
One hinge as described complete with countersunk Pozi drive woodscrews in matching finish.
These hinges are normally available from stock. If we are temporarily out of stock you should allow 10 - 14 working days for despatch.