Help & Advice | 01424 777 873
Your cart 0 £ 0.00
Quality fittings for buildings of distinction
Shop Departments
Search Your Cart   Continue Shopping

#02 - Winkhaus Cobra Multi-Point Door Lock 35mm KTA

(Code: 2602.121)
£ 77.72
(2 Item(s) In Stock)
Add to cart
#02 - Winkhaus Cobra Multi-Point Door Lock 35mm KTA
  • #02 - Winkhaus Cobra Multi-Point Door Lock 35mm KTA
  • #02 - Winkhaus Cobra Multi-Point Door Lock 35mm KTA
  • #02 - Winkhaus Cobra Multi-Point Door Lock 35mm KTA
  • #02 - Winkhaus Cobra Multi-Point Door Lock 35mm KTA

Winkhaus Cobra Two Hookbolt Multipoint Door Lock, Standard Door Height Variant with Radius Ends, Key Turn Operation, 35mm Backset

- Priced per Single
- Key/thumbturn operation, no lever handles required
- 35mm backset, 92mm centres
- Radiused faceplate for standard door heights
- Core Stock Product

Winkhaus Product Ref: 2948840

Secured by Design PAS 24 Enhanced Security High Security 10 Year Guarantee
Residential Use Commercial Use Industrial Use

The Winkhaus Cobra KTA Key/Thumbturn Multipoint Lock is an ideal solution for single entrance doors and other external doors in domestic settings requiring a high security yet cost effective and versatile locking system. An excellent choice for doors where lever handles are either not required or are of a type not suitable for lift-lever operated locks. This Standard variant has a radiused end faceplate and is suitable for normal height doors up to 2105mm.

Supplied here in lock only format excluding strikeplates and keeps. Individual strikes and keeps can be purchased via the relevant product link in the "Related Items" section below.

  • Key/Thumbturn Operation:
    All bolts are thrown and retracted by operation of the lock cylinder barrel thus negating the need for lever handle furniture. Depending on the requirement, lock cylinders can be key and turn type (external key/internal thumbturn), double cylinder (key both sides) or single cylinder (key one side only). Lever handles can be fitted in full or half sets if required and will withdraw the central latchbolt only.
  • High Security:
    Cobra locks have been tested in all frame materials to PAS23/24 Enhanced Security standards and are approved by the Police 'Secured by Design’ Security initiative and by the Master Locksmith Association’s Sold Secure Scheme.
  • 25mm Throw Solid Brass Cobra Hooks:
    High security solid forged brass and nickel plated anti ‘push-back’ Cobra hooks locate behind the steel keeps for optimum security and help prevent forcing apart of the door and frame.
  • High Performance Central Gearbox:
    Tested to 100,000 cycles the sprung gearbox offers the lowest possible operating forces and helps prevent handle droop. Nickel plated sprung latchbolt and 20mm throw nickel steel deadbolt provide maximum strength in the centre of the door.
  • Corrosion Resistant:
    Winkhaus locks have a protective surface coating in excess of EN 1670 : 2007 Grade 4 which is designated as ‘Very high corrosion resistance’
  • Weather Seal Compression Adjustment:
    Enhanced tapered hook design and adjustment in the keeps provides low operating forces. With ± 2mm adjustment it is possible to adjust for misalignment of the door during and after installation.

For optimum security this lock should be fitted with a TS 007 3 Star cylinder (see our ULTION Maximum Security range) or a TS 007 1 Star cylinder with 2 Star cylinder guard (see our Adapta Prime High Security range).

If required, lever handle furniture can be self-sprung or unsprung either on backplate or on rose with seperate cylinder escutcheons. Handle backplates should be compatible with the lock centres measurement and fixing centres measurements. Please refer to the relevant technical drawings.

One Cobra KTA Standard Variant multipoint lock as described. Strikeplates and keeps should be ordered seperately if required.

This multipoint lock is normally available from stock. If we are temporarily out of stock you should allow 10 - 14 working days for despatch.

[Manufacturer's Brochure]
Cobra Hookbolt Multipoint Lock System
[Cobra Standard Variant]
Dimensional drawing of Cobra Standard 2 Hook Multipoint Lock with Radius Faceplate