Help & Advice | 01424 777 873
Your cart 0 £ 0.00
Quality fittings for buildings of distinction
Shop Departments
Search Your Cart   Continue Shopping

#05 - Winkhaus FAB Cobra Multi-Point Double Door Lock Short

(Code: 2610-300-CL45-FAB31)
FAB Door Height :
£ 278.98
Add to cart
#05 - Winkhaus FAB Cobra Multi-Point Double Door Lock Short
  • #05 - Winkhaus FAB Cobra Multi-Point Double Door Lock Short
  • #05 - Winkhaus FAB Cobra Multi-Point Double Door Lock Short
  • #05 - Winkhaus FAB Cobra Multi-Point Double Door Lock Short
  • #05 - Winkhaus FAB Cobra Multi-Point Double Door Lock Short
  • #05 - Winkhaus FAB Cobra Multi-Point Double Door Lock Short
  • #05 - Winkhaus FAB Cobra Multi-Point Double Door Lock Short

Winkhaus FAB Concealed Slave Door Flush Bolt + Cobra Hookbolt Multipoint Lock for Double Doors, Short Variant with Cropable Square Ends, Lift-Lever Operation to Master Door, 45mm Backset

- Priced per Set complete with keeps
- Cobra hookbolt lock on the master door
- Concealed flush bolt with vertical shootbolts to slave door
- Lift-lever operation to master door only
- 45mm backset, 92mm centres
- Door height variants from 1853mm to 2139mm*
- Core Stock Product

Secured by Design PAS 24 Enhanced Security High Security 10 Year Guarantee
Residential Use Commercial Use Industrial Use

The Winkhaus FAB Concealed Flush Bolt System is a high security locking solution for double doors and is an ideal choice for inward or outward opening entrance doors. Operation of the integrated two-way lever on the FAB face throws two heavy duty 20mm shootbolts into the head and cill to secure the slave door. The Cobra lock on the master door has two high tensile steel hookbolts which penetrate the FAB Slave lock to secure the two leaves together. The FAB lock is fully concealed when both doors are closed and it can only be operated with the master door open.

Finished in corrosion resistant Silver and supplied here as a complete set with master door lock, top/bottom shoots and keeps for shorter doors from 1853mm high. Individual component parts can be purchased via the relevant product link in the "Related Items" section below

  • Slave Door Lock Operation:
    The top and bottom vertical shootbolts are thrown or retracted by operation of the FAB faceplate lever.
  • Master Door Lock Operation:
    The central deadbolt and top/bottom hookbolts are thrown internally or externally by lifting the door lever handle. The door is then locked by operation of the lock cylinder barrel. Unlocking of the door is by reverse action. Depending on the requirement, lock cylinders can be key and turn type (external key/internal thumbturn), double cylinder (key both sides) or single cylinder (key one side only).
  • High Security:
    Cobra locks have been tested in all frame materials to PAS23/24 Enhanced Security standards and are approved by the Police 'Secured by Design’ Security initiative and by the Master Locksmith Association’s Sold Secure Scheme.
  • 25mm Throw Solid Steel Hooks:
    High security high tensile steel and nickel plated anti ‘push-back’ Cobra hooks locate behind the FAB faceplate for optimum security and help prevent forcing apart of the door and frame.
  • High Performance Central Gearbox:
    Tested to 100,000 cycles the sprung gearbox offers the lowest possible operating forces and helps prevent handle droop. Nickel plated sprung latchbolt and 20mm throw nickel steel deadbolt provide maximum strength in the centre of the door.
  • Corrosion Resistant:
    Winkhaus locks have a protective surface coating in excess of EN 1670 : 2007 Grade 4 which is designated as ‘Very high corrosion resistance’
  • Weather Seal Compression Adjustment:
    Enhanced bolt design and adjustment in the keeps provides low operating forces. With ± 2mm adjustment it is possible to adjust for misalignment of the door during and after installation.

This lock set is handed Left Hand or Right Hand and care must be taken to specify the correct hand when ordering.

For optimum security the master door lock should be fitted with a TS 007 3 Star cylinder (see our ULTION Maximum Security range) or a TS 007 1 Star cylinder with 2 Star cylinder guard (see our Adapta Prime High Security range).

Lever handle furniture MUST be of a type that allows the handle to be lifted. Handle backplates should be compatible with the lock centres measurement and fixing centres measurements. Please refer to the relevant technical drawings.

One FAB slave door flush bolt with croppable top shootbolt and top/bottom shootbolt keeps plus one Cobra multi-point lock.

This multipoint lock set is stocked in component parts in quantities normally sufficient to fulfill most orders for immediate despatch. Where we are temporarily out of stock you should allow approximately 10 - 14 working days for despatch. Please contact us if you would like to know the stock situation prior to placing your order.

[Manufacturer's Brochure]
FAB Slave Door Lock System